Phase Converters for CNC Machines

CNC machines are different from standard three-phase motor loads because they’re more sensitive to power quality, needing balanced power to avoid faults and maintain tight tolerances.

A 3-phase CNC machine needs a phase converter that can provide tight voltage balance between legs and enough capacity to power the spindle motor, controls, servo drives, and coolant pumps. 

Many machine shops choose to install a phase converter over utility three-phase power because it’s typically less expensive and time-consuming. North America Phase Converters offers both CNC-rated rotary phase converters and solid state digital phase converters, so you can choose the option that best fits your shop and budget. 

Close-up of a CNC machine drill bit cutting into a metal plate while coolant sprays and splashes around the tool

Shop Our CNC-Rated Phase Converters

Choosing the right phase converter for your CNC machine depends on its power requirements, sensitivity to voltage fluctuations, and your budget. Our Pro-Line Rotary Phase Converters deliver reliable, balanced three-phase power for a wide range of CNC applications at a cost-effective price. For machines requiring tighter voltage tolerances and greater power precision, our TritonPro Maxx™ Digital Phase Converters provide our highest level of power quality. Always verify your machine’s electrical specifications before choosing a converter.

North America Phase Converter Co. Pro-Line rotary phase converter with small enclosure and medium frame ODP idler motor

Pro-Line Rotary Phase Converters

These reliable converters deliver balanced three-phase power and are trusted to run compatible CNC equipment, including Haas VF series machines, Mazak VTC series machines, and more.

NAPCco TritonPro Maxx TPX digital phase converter for clean balanced three phase power conversion

TritonPro Maxx™ Digital Phase Converters

Our most advanced solution for CNC machines requiring exceptional power quality. TritonPro Maxx™ maintains voltage balance within 2% phase-to-phase for sensitive CNC controls and equipment. 

How to Size a Phase Converter for a CNC Machine

While spindle horsepower is important, it doesn’t give the full picture. Find the full load amperage (also referred to as full load current) or kVA rating on your machine’s nameplate. 

Rotary Phase Converter Sizing

It’s best practice for a rotary converter to run at 50 to 60% load, as this keeps voltage stable and balanced. There are two ways to size a Pro-Line rotary phase converter for a CNC machine. 

Sizing Option 1

  1. Gather your machine’s power requirements: full load amps (FLA), voltage, kVA, and spindle HP.
  2. Multiply FLA by 2.
  3. Go to the Pro-Line Model Comparison Chart. Choose a model with a max capacity amperage (found in column 4) equal to the number found in the previous step. If you are in between sizes, round up to the nearest size.

Sizing Option 2

  1. Gather your machine’s power requirements: full load amps (FLA), voltage, kVA, and spindle HP.
  2. Go to the Pro-Line Model Comparison Chart. Choose a model with an optimal sizing amperage (found in column 3) equal to your machine’s FLA rating. If you are in between sizes, round up to the nearest size.

Digital Phase Converter Sizing

For digital converters, you can size up to 100% full load amperage.

  1. Gather your machine’s power requirements: full load amps (FLA), voltage, kVA, and spindle HP.
  2. Match the converter’s FLA rating to your machine’s FLA.
  3. If you want a safety margin, go one size up.

Other Important Sizing Considerations

  • Duty Cycle: A machine that runs at full load in a heavy production environment may need a larger phase converter than one used for prototypes or one-off parts.
  • Material Type: Common materials include steel, aluminum, wood, or plastic. What you’re cutting can impact amperage draw and the load your phase converter must handle.
  • Vacuum Pumps: CNC routers often use a vacuum pump to keep material securely in place. Find the FLA or HP on the pump’s nameplate and add it to the machine’s total electrical demand.
  • Controls: Some machines, often small mills, have single-phase controls or feed them from a separate power input. Confirm if this is true for your machine before choosing a converter.

Phase Converter Sizing Examples

The following table includes real customer machines and the phase converter our sizing experts recommended. 

CNC Machine Full Load Amps Pro-Line Phase Converter Size TritonPro Maxx™ Phase Converter Size
CNC Lathe 35 A 30 HP 15 HP
CNC Mill 70 A 60 HP 30 HP
CNC Press Brake 50 A 40 HP 20 HP
CNC Router 25 A 20 HP 10 HP

Phase Converters for CNC Machines FAQs

We work with dozens of CNC manufacturers including Haas, Mazak, Nargesa, FANUC ROBODRILL, Syil, Tormach, Hurco, Fadal, Baileigh Industrial, Southwest Industries, Star, Multicam, and more. Whether you have a CNC mill, lathe, router, press brake, or plasma cutter, we will help you find the right converter to power your equipment.

No, you cannot use a VFD to power a whole CNC machine. Many CNC machines have a built-in VFD that controls the speed of the spindle motor. VFDs work with AC motors by changing the supplied frequency and voltage, and this output can interfere with a CNC machine’s controls, electronics, and servo drives, potentially leading to faults and damage. For true three-phase output that can effectively power all components of the machine, choose a rotary or digital phase converter.

No, you cannot use a static phase converter to run a CNC machine, since these converters are designed for easy-starting motor loads only, such as drill presses and small manual mills. 

Not if you choose the right type and size. Damage happens when a phase converter is undersized, the wrong type, or its phase-to-phase voltage output is unbalanced. Every CNC manufacturer sets its own voltage balance and power quality requirements. Check your machine’s manual or nameplate before you buy, or call our technical team and we will confirm the right phase converter for you.

Please call us at 877-545-2926 or use our contact form …

CNC machines are a big investment. Our sizing engineers have worked on thousands of CNC applications and will work with you to find the right power solution.