Many industrial woodworking tools are three-phase for a reason. Three-phase motors run more efficiently, last longer, and cost less per horsepower than single-phase motors. New and used three-phase machines are widely available, and shop owners often get a good deal before realizing they don’t have the right power.
NAPCco rotary and digital phase converters solve this issue by turning single-phase power into three-phase power, so you can run your woodworking equipment without upgrading your electrical service.
Phase converters are the standard choice in woodworking, furniture, and cabinetry shops because they produce true three-phase output and can run multiple machines at the same time. This is different from a static phase converter or VFD, which can only run one motor load at a time.
Woodworking Machines a NAPCco Phase Converter Can Run

Shaping and Planing
molders, shapers, planers, jointers, lathes

Sawing and Cutting
table saws, panel saws, chop saws, radial arm saws, bandsaws

Sanding and Finishing
wide belt sanders, belt sanders, edge banders

Shop Support
dust collectors, air compressors, blowers

Drilling
drill presses, boring machines, routers
How to Size a Phase Converter for a Woodworking Shop
Each machine has different startup characteristics. It’s important to size the converter around the combined load of all machines that may run together.
- Add up the HP or FLA of all three-phase machines that will run at the same time.
- Flag any hard-starting loads and consider locked-rotor amps (LRA). Dust collectors, air compressors, and hydraulic loads will need extra starting capacity, since they draw high inrush current during startup.
- Make sure you have enough single-phase power available. Confirm the single-phase amperage available at your breaker panel. Use this calculator to figure out how much single-phase power you will need.
- Call NAPCco to confirm sizing with an expert.
Woodworking Shop Sizing Examples
Pro-Line rotary phase converters are engineered to power a wide range of three-phase woodworking tools. The following table features real sizing scenarios from our customers and what we recommended.
| Woodworking Machine(s) | Recommended Phase Converter Size | Reasoning |
|---|---|---|
| 5 HP table saw | Pro-Line 7.5 HP: PL-7 | Table saws are easy to start loads, meaning the blade spins up quickly. We recommend going one size up for a rotary phase converter. |
| 5 HP shaper with a 1 HP feeder motor | Pro-Line 10 HP: PL-10 | A 10 HP rotary phase converter would provide an ample power buffer for both motors to run together. |
| 7.5 HP bandsaw | Smart-Boost™ 15 HP: SB-15 | Many bandsaws have flywheels, which can be difficult to get up to speed. For these types of machines, we recommend our Smart-Boost™ model, which has a built-in current booster. This feature delivers the surge of current flywheel loads need to get started. |
| 10 HP planer | Pro-Line 20 HP: PL-20 | Planers are hard-starting loads. Size the rotary phase converter double the HP rating of the planer. |
| 10 HP planer and 7.5 HP dust collector | Pro-Line 40 HP: PL-40 | Size for the combined load, which is 17.5 HP: 10 HP + 7.5 HP. To account for starting loads, we need a phase converter with a capacity of at least 35 HP. The next closest size would be 40 HP. Choose a 50 HP rotary converter if you want more buffer room. |

